Honda CBR954RR 2002 Service Manual page 198

HYDRAULIC BRAKE
Apply silicone grease t o the contact surfaces of the
brake lever and piston tip.
Install the brake lever assembly, tighten the pivot bolt
t o the specified torque.
TORQUE:
Hold the pivot bolt and tighten the pivot nut to the
specified torque.
TORQUE: 6 N - m
Apply brake fluid t o the new reservoir joint O-ring.
Install the master cylinder reservoir joint into the
ter cylinder and secure the joint with a snap ring.
TOOL:
Snap ring pliers
Install the dust cover.
Install and tighten the reservoir mounting bolt.
(0.6 kgf-m, 4.3 Ibf-ft)
BRAKE'LEVER
mas-
PIVOT BOLT
BOLT