Oil Pump Removal - Honda CBR954RR 2002 Service Manual

Apply oil t o the new O-ring and install it onto the relief
valve.
Install the relief valve into the crankcase.
Clean the oil pan mating surface thoroughly.
Apply Three Bond 12078 or an equivalent to the mat-
Do not apply
ing surface.
sealant more than
necessary
Install the oil pan onto the lower crankcase.
Install the oil pan mounting bolts.
Temporarily tighten the t w o bolts first, then tighten a l l
the bolts in a crisscross pattern in 2 - 3 steps.
Install the exhaust pipe (page 2-16).
Fill the crankcase with the recommended oil (page
3-16).
After installation, check that there are no oil leaks.
OIL PUMP
REMOVAL
Remove the following:
-
Clutch assembly (page 9-4)
-
Oil strainer and pressure relief valve (page
Remove the boltiwasher, then remove the oil p u m p
chain as an assembly.
I
4-3)
1
,
4-5