FUEL SYSTEM (Programmed Fuel Injection)
FUEL PRESSURE INSPECTION
NOTICE
Before disconnecting fuel hoses, release the fuel
pressure by loosening the fuel hose banjo bolt at
the fuel tank.
Always replace the sealing washers when the fuel
hose banjo bolt is removed or loosened.
Remove the seat (page 2-21,
Disconnect the battery negative cable f r o m the bat-
tery terminal.
Disconnect the pressure regulator vacuum hose
plug the vacuum hose.
Cover the fuel hose banjo bolt w i t h a rag or shop
towel.
Slowly loosen the fuel hose banjo bolt and catch the
remaining fuel using a approved gasoline container.
5-54
I
FUEL TANK SUPPORT ROD
and