Ignition Pulse Generator Installation - Honda CBR954RR 2002 Service Manual

Remove the right crankcase cover (page 9-3).
Remove the wire grommet
Remove the bolts and ignition pulse generator.
Shift the transmission into 6th gear and apply the rear
if the engine
out of the frame, brake.
remove the
Remove the ignition pulse generator rotor special
alternator cover
bolt.
hoid the f/ywheel
with the
then remove the
INSTALLATION
Install the ignition pulse generator rotor by aligning
the wide groove w i t h the wide teeth of the crankshaft.
Apply oil to the ignition pulse generator rotor bolt
threads, then install the washer and rotor bolt.
from
the cover.
IGNITION SYSTEM
17-7