Drive Chain Cleaning And Lubrication; Drive Chain Sprockets Inspection - Honda CBR954RR 2002 Service Manual

CLEANING AND LUBRICATION
Clean the chain with non-flammable or high flash-
point solvent and wipe it dry.
Be sure the chain has dried completely before lubri-
cating.
Inspect the drive chain for possible damage or wear.
Replace any chain that has damaged rollers, loose fit-
ting links, or otherwise appears unserviceable.
Installing a new chain o n badly w o r n sprockets will
cause the new chain t o wear quickly.
Inspect and replace the sprocket as necessary.
Lubricate the drive chain with #80 - 90 gear oil or
drive chain lubricant designed specifically for use
with O-ring chains. Wipe off the excess oil or chain
lubricant.
SPROCKETS INSPECTION
Inspect the drive and driven sprocket teeth for wear or
damage, replace if necessary.
Never use a new drive chain on worn sprockets.
Both chain and sprockets must be in good condition,
or the new replacement chain will wear rapidly.
Check the attaching bolts and
driven sprockets.
If any are loose, torque them.
TORQUE:
Drive sprocket bolt: 54 N-m
Driven sprocket nut: 64 N-m
nuts o n the drive and
(5.5 kgfom, 40 Ibf-ft)
(6.5 kgf-m, 47 I b f W
NON-FLAMMABLE OR HIGH
FLASH-POINT SOLVENT
WIPE AND DRY
LUBRICATE
#80 - 90 GEAR OIL
DRIVE CHAIN LUBRICANT
DAM
MAINTENANCE
,
M A L
3-21