Seat Removal; Seat Installation; Pillion Seat/Rear Cowl Removal - Honda CBR954RR 2002 Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
SEAT
REMOVAL
Remove the t w o seat mounting bolts behind the seat.
Slide the seat back and then off.
Remove the mounting collars.
I NSTALLATI 0 N
Install the collars into the seat bottom plate as shown.
Align the seat hook with the fuel tank rear bracket and
install the seat.
Install and tighten the bolts securely.
PILLION SEAT/REAR COWL
REMOVAL
Remove the seat (see above).
Open the pillion seat using the ignition key.
Remove the pillion seat mounting nuts, then remove
the seat belt and pillion seat.
Disconnect the seat lock cable from the key cylinder.
2-2
BOLTS
COLLARS
PILLION SEAT k I G N I , T I Y KEY
NUTS
SEAT LOCK CABLE