Fast Idle Wax Unit Removal; Fast Idle Wax Unit Installation - Honda CBR954RR 2002 Service Manual

Hold the fuel pipe securely, tighten the pressure regu-
lator mounting bolts t o the specified torque.
TORQUE: 10
Connect the vacuum hose t o the pressure regulator
FAST IDLE WAX UNIT
REMOVAL
D
not ioosen or
O
remove the wax
Remove the wax unit mounting screws.
and adjusting nut
Release the wax unit shaft joint piece f r o m the wax
unit link arm, then remove the w a x unit assembly.
INSTALLATION
Install the wax unit shaft joint piece t o the w a x unit
link arm.
Install and tighten the wax unit mounting screws t o
the specified torque.
TORQUE: 5 N-m (0.5 kgf-m,
(1.0 kgf-m, 7 Ibf-ft)
3.6 Ibf-ft)
FUEL SYSTEM (Programmed Fuel Injection)
VACUUM HOSE PRESSURE REGULATOR