Honda CBR954RR 2002 Service Manual page 204

HYDRAULIC BRAKE
DISASSEMBLY
Install corrugated cardboard or equivalent between
the pistons.
Apply small squirts of air pressure t o the fluid inlet to
Do not use high
pressure air or
remove the pistons.
bnng rhe nozzle
too close to the
inlet
Remove the following:
Mark the pistons
to ensure correct - Joint seals
- Caliper piston A
- Caliper piston B
Push the dust seals and piston seals in and lift them
Be carefdnot to
out.
damage the piston
sliding surface
Clean the seal grooves with clean brake fluid.
15-22