Lubrication System Service Information; Lubrication System Specifications - Honda CBR954RR 2002 Service Manual

LUBRICATION SYSTEM DIAGRAM
SERVICE INFORMATION
TROUBLESHOOTING
OIL PRESSURE INSPECTION
SERVICE INFORMATION
GENERAL
Repeated, prolonged exposure t o used motor oil m a y cause skin cancer.
Wash your hands thoroughly with strong soap as soon as possible after handling used oil.
The oil p u m p can be serviced w i t h the engine installed i n the frame.
The service procedures i n this section must be performed w i t h the engine o i l drained.
When removing and installing the oil pump, use care not t o allow dust or dirt t o enter the engine.
If any portion o f the oil p u m p is worn beyond the specified service limits, replace the oil p u m p as an assembly.
After the oil p u m p has been installed, check that there are no oil leaks and that oil pressure is correct.
SPECIFICATIONS
Engine oil capacity
Recommended engine oil
I
Oil pressure at oil pressure switch
Oil pump rotor
4-0
4- 1
4-2
4-3
A t draining 3.5 liter (3.7 US qt, 3.1 Imp
A t oil filter change 3.7 liter (3.9
A t disassembly 4.0 liter (4.2 US
Pro Honda GN4 or HP4 (without molybde-
n u m additives) 4-stroke oil or equivalent
motor oil
API service classification: SG or higher
JASO T 903 standard:
Viscositv: SAE IOW-40
490 kPa (5.0 kgf/cm2, 71 psi) at
5,400 rpm/(80"C/176"F)
Tip clearance 0.15 (0.006) max.
Body clearance 0.15 - 0.22 (0.006 - 0.009)
0.02 - 0.07 (0.001 - 0.003)
Side clearance
OIL STRAINERPRESSURE RELIEF
VALVE
OIL PUMP
OIL COOLER
STANDARD
US
qt, 3.3 Imp qt)
3.5 Imp qt)
qt,
MA
T
4-3
4-5
4-9
Unit: mm
SERVICE LIMI-
0.20 (0.008)
0.35 (0.014)
0.10 (0.004)