FUEL SYSTEM (Programmed Fuel Injection)
Turn the ignition switch to "OFF"
Disconnect the IAT sensor 2P connector.
Check for loose or poor contact on the IAT sen-
sor connector.
Connect the IAT sensor 2P connector.
Place the motorcycle on its side stand.
Turn the ignition switch to "ON".
Check that the MIL blinks.
I
Turn the ignition switch to "OFF".
Disconnect the IAT sensor 2P connector.
Measure the resistance
-
-
30 "C/68
86
-
4 kR
Standard: 1
Turn the ignition switch to "ON".
5-22
9
blinks
the IAT sensor
20
a t
( a t
Normal
Does not blink
Loose or poor contact on the IAT sensor connector
Abnormal
Faulty IAT sensor