Pressure Regulator Removal/Installation - Honda CBR954RR 2002 Service Manual

FUEL SYSTEM (Programmed Fuel Injection)
Install the fuel pipe assembly onto the throttle body,
being careful not t o damage the seal rings.
Install and tighten the fuel pipe mounting bolts t o the
specified torque.
TORQUE:
Install the throttle body (page 5-71).
Do not apply excessive force to the fuel pipe.
Disconnect the vacuum hose f r o m the pressure regu-
lator.
Hold the fuel pipe securely, remove the pressure reg-
ulator mounting bolts, then remove the pressure reg-
u I a t o r.
Install a new O-ring into the pressure regulator body.
Install the pressure regulator onto the fuel pipe.
5-74
7 Ibf-ft)
FUEL INJECTORS
FUEL PIPE ASSEMBLY
VACUUM HOSE PRESSURE REGULATOR
\
PRESSURE REGULATOR