Club Car 2008-2011 Maintenance And Service Manual page 61

POWERDRIVE CHARGER (EXTERNAL)
BLACK WIRE TO
CIRCUIT BREAKER
BLUE WIRE TO
DC CORD
TAN WIRE TO
PRIMARY COIL
VOLTAGE SUPPRESSOR
AC Cord Installation
1. Insert the black, white, and green leads of the new AC cord into the charger through the hole in the
charger face (Figure 3-27, Page 3-33).
2. Connect the black wire to the AC circuit breaker, the white wire to the primary coil, and the green wire
to the charger base. Tighten the screw on the green (ground) wire terminal to 18 in-lb (2.0 N·m).
3. Position the strain relief bushing on the AC cord.
4. Using pliers, install the strain relief bushing and AC cord into the mounting hole in the charger face.
5. Install the charger cover.
TAN WIRE TO
PRIMARY COIL
GREEN GROUND
WIRE
BLACK WIRE TO RELAY
(RED WIRE) TO
HEATSINK
Figure 3-27 Charger Relay
2008-2011 Domestic Battery Charger Maintenance and Service Manual
WHITE WIRE
FROM AC CORD
STRAIN RELIEF
BUSHING
AC CORD
AC CIRCUIT
BREAKER
CHARGER
RELAY
3
Charger Repairs
Page 3-33