Connecting The Batteries - Club Car 2008-2011 Maintenance And Service Manual

1
SAFETY

CONNECTING THE BATTERIES

1. Ensure the Tow/Run switch is in the TOW position.
2. Connect the battery cables, positive (+) cable first.
3. Tighten battery terminals to 110 in-lb (12.4 N·m).
4. Coat terminals with Battery Terminal Protector Spray (CC P/N 1014305) to minimize corrosion..
Figure 1-1 Precedent Battery Configuration – Style A
4 x 12-Volt Batteries
(Viewed from driver side of vehicle)
1. Place TOW/RUN Switch in TOW before disconnecting or
connecting battery cables.
2. Remove negative battery cable.
3. Remove positive battery cable.
Connect battery cables in reverse order.
1
2
Figure 1-3 Precedent Battery Configuration – Style C
6 x 8-Volt Batteries
(Viewed from driver side of vehicle)
1. Place TOW/RUN Switch in TOW before disconnecting or
connecting battery cables.
2. Remove negative battery cable.
3. Remove positive battery cable.
Connect battery cables in reverse order.
Page 1-4 2008-2011 Domestic Battery Charger Maintenance and Service Manual
4
3
(–)
(+)
1
2
(+)
(–)
3
4
5
(+)
1
2
Figure 1-2 Precedent Battery Configuration – Style B
4 x 12-Volt Batteries
(Viewed from driver side of vehicle)
1. Place TOW/RUN Switch in TOW before disconnecting or
connecting battery cables.
2. Remove negative battery cable.
3. Remove positive battery cable.
Connect battery cables in reverse order.
(–)
6
Figure 1-4 DS, DS Villager 4, 800, 810, 850 and Carry-
all 232 IQ System 4x12-volt Battery Configuration
(Viewed from driver side of vehicle)
1. Place TOW/RUN Switch in TOW before disconnecting or
connecting battery cables.
2. Remove negative battery cable.
3. Remove positive battery cable.
Connect battery cables in reverse order.
General Warning
3
4
(–)
(+)
1
2
3
4