General Commands - Avery Dennison MONARCH 9493 System Administrator Manual

Syntax:
help set ip
IP
Access [EN/DIS] aa.bb.cc.dd {Mask ee.ff.gg.hh}
ADdress aa.bb.cc.dd IP node address
ARP [EN/DIS]
BAnner [EN/DIS]
CHKSUM [EN/DIS]
BOot
ECHO [EN/DIS]
ENable/DISable
FTIme [EN/DIS]
FTP [EN/DIS]
HTTP [EN/DIS]
HTTPS [EN/DIS]
KEepalive n
LPD [EN/DIS]
MEthod <type>
PIng aa.bb.cc.dd
PRObe [EN/DIS]
RANge [EN/ALL] aa.bb.cc.dd [MAx ee.ff.gg.hh]
RARp flags nn
REtry [EN/DIS]
ROuter aa.bb.cc.dd
SUbnet aa.bb.cc.dd
STELnet [EN/DIS]
TCP [EN/DIS]
TELnet [EN/DIS]
TFTP [EN/DIS]
TImeout n
TRAP n [ADDR/PORT/TRIG]
WIndow
Displays a list of the available help commands for "Set IP."
G e n e r a l C o m m a n d s
From the list of commands, the brackets - [] indicate to pick one of the options listed.
CLear/DELete/PUrge
Removes a specified parameter or configuration item.
CLear FATal
Deletes fatal error log.
CLear POrt <portname> JOB
Clears current entry in the print server's internal queue for the specified portname (P1 for the first
parallel port).
CLear PROTECT
Sets the update password to "null."
CLear SERVEr STRing n
Removes BOT/EOT string.
EXIT/^D
Exits console mode.
HElp
Displays the list of available commands.
INitialize
Saves settings and resets unit.
LPD/TCP Parameters
IP set via ARP
LPD banner printing
IP receive checksum
n Number of DHCP/BOOTP tries
TCP echo protocol
Enable or Disable IP Processing
Timeout in seconds if enabled
FTP protocol
HTTP protocol
HTTPS protocol
Keepalive interval (min)
LPD protocol
Set method of getting IP address
Test connection to IP host
TCP connection probes
1=no subnet, 2=no router, 3=neither
LPD retry continuation
Default router address
Subnet mask
S-TELNET protocol
Raw TCP (9100) protocol
TELNET protocol
TFTP protocol
Inactivity timeout
nn LPD/TCP maximum window size
TRAP configuration
Telnet Console Commands 6-3