11/04 Rev. 3.01-01
OPERATOR / SERVICE MANUAL
All Printers
General safety notes
WARNING!
Safe and efficient operation of the printer can only be guaranteed if you
observe all necessary information.
Before operating the printer, read the operating instructions and all other
notes carefully.
Observe the additional safety and warning notes on the machine.
Only operate the printer using the system voltage indicated on the name-
plate!
Only connect the printer to a grounded power socket fitted to authorized
standards!
Make sure that the power supply socket for the printer is readily accessible!
Only use the printer in enclosed areas with normal environmental conditi-
ons (standard office temperatures)!
Only operate the printer when the cover is closed!
Only trained and authorized personnel should operate the printer!
During operation, the printhead can become hot! Care should be taken
when touching the printhead!
Do not make any modifications or any additional casing for the printer!
Do not allow any liquids to enter into the printer!
Repairs to the printer may only be performed by authorized specialists who
are aware of the risks involved!
In case of emergency, switch off the printer and disconnect the power
supply cable!
Before cleaning, switch off the printer and disconnect from the power!
Only use original accessories!
Connect the printer only to devices that fulfil SELV (safety extra-low
voltage) circuit requirements to EN 60950!
Keep long hair, loose jewellery, long sleeves, etc. away from rotating parts
of the printer!
Information must be made available
This operating manual
is to be stored at the machine operating location and made accessible to the
operator.
is to be maintained in legible condition.
Safety and warning notices attached to the machine must be kept clean and
legible. Missing or damaged warning labels and plates are to be replaced.
3
Safety