Call Diversion; Call Diversion In Profiles; Absence Handling - ASCOM d62 Talker Configuration Manual

Configuration Manual
Ascom d62 DECT Handset
5.7

Call Diversion

User friendly call diversion menus can be configured in the handset using PDM/Device
Manager. These menus can then be selected in the handset by selecting Calls > Call services
> Divert calls.
Tip: Beside the default call diversion menus, up to ten system specific services codes can be
defined. See
1 Select Systems > System X (where X represents A - H).
2 Select PBX Settings > Diversion.
3 Select "Internal", "External", "On No Reply", "On Busy", and/or "All Calls"; enter the
following:
• Prefix - the system specific prefix code to be used (if required by the PBX used)
• Suffix - the system specific code required to activate the diversion (for example
"*21*")
• Cancel - the system specific code required to deactivate the diversion (for
example "#23#").
The user can now enter the diversion number in the handset.
5.7.1

Call Diversion in Profiles

A handset can be configured to divert calls when a certain profile is activated.
Note: The PBX settings for call diversion must also be configured, see
1 Select User Profiles > User Profile X > Presence and diversion.
2 Select which calls to be diverted (that is all call, internal calls etc.).
3 In the Divert calls to field, enter the phone number where the calls shall be diverted to
when the profile is activated.
4 Select "User Profile X".
In the Name field, enter an appropriate name of the profile.
5
Additional settings can be added for a profile, such as soft keys, sound and alert etc. See
5.39.1 User Profiles
5.8

Absence Handling

User friendly absence menus can be configured in the handset using PDM/Device Manager.
These menus can then be selected in the handset by selecting Calls > Call services > Absence
to set the reason why a call cannot be answered, for example when the user is in a meeting.
The calling party is notified about the absence reason when making the call.
In addition to the default absence menus, up to 10 extra system specific services codes can
also be defined, see
1 Select Systems > System X (where X represents A - H).
2 Select PBX Settings > Absence.
31 October 2013 / Ver. J
5.6 Call Services.
on page 49.
5.6 Call Services on page 21.
TD 92639EN
5.7 Call Diversion.
22