Configuring Own In Call Functions; Creating And Hiding A Soft Key To An In Call Function - ASCOM d62 Talker Configuration Manual

Configuration Manual
Ascom d62 DECT Handset
5.9.4

Configuring Own In Call Functions

Up to 10 extra system specific call services by codes can be defined. The codes can be
programmed as follows:
• With digits 0-9
• The characters # and *
• P – Pause
• H – Hook (auto disconnection)
• U – The handset prompts for user input. Numerical characters may also be entered as
input (procedure call).
To define a system specific call service:
1 Select Systems > System X > PBX Settings > In call functionality > General purpose X
2 In the Name field, enter the name to be displayed in the In call menu.
3 In the Data field, enter the applicable code to be used for the function.
4 Click "OK" to save the settings.
Tip: The handset supplier may have a template example for configuring the In call functions
menu for the PBX.
5.9.5

Creating and Hiding a Soft Key to an In Call Function

The left and right Soft keys can be configured as shortcuts to a certain In call functions, or
completely hidden. By default, the left Soft key is configured as a loudspeaker key, and the
right Soft key is configured as R-key.
Create a Soft Key to an In Call Function
1 If needed, configure the In Call functionality to be used. See
23. This is not needed if the Loudspeaking function or R-key is used.
2 Select Systems > System X > PBX Settings > In call functionality > Soft key X
3 In the Name field, enter a descriptive name of the Soft key. This is not needed if the
Loudspeaking function or R-key is used.
4 In the Function drop-down list, select the function to be used:
• R-key
• Loudspeaking function
• Start a new call during a conversation
• End a call
• Switch between calls
• Transfer a call
• Transfer to a new call
• Make a conference call
• Activate call back
• Sending call waiting
• General purpose 1 -10
5 Click "OK" to save the settings.
Hide a Soft Key to an In Call Function
1 Select Systems > System X > PBX Settings > In call functionality > Soft key X
2 In the Function drop-down list, select "Not used".
3 Click "OK" to save the settings. The Soft key is not visible during a call.
31 October 2013 / Ver. J
TD 92639EN
5.9 In Call Menu on page
25