Dect Info; Send Data; Loudspeaking Function; Call Diversion - ASCOM d63 User Manual

User Manual
Ascom d63 DECT Handset

5.4.17 DECT Info

DECT info is an advanced function intended for an administrator using the handset to
measure RF link and system parameters as part of a troubleshooting or site surveying
procedure. This option is only visible if the Admin menu is activated as described in section
11.1 Admin Menu
handset (TD number: See

5.4.18 Send Data

User entered data can be sent from the handset by pressing a pre-programmed hot key or
soft key, or selecting a Service. Sent data can be used to initiate actions such as opening a
door or starting and stopping a machine. The data can either be predefined, entered after
the hot key or soft key is pressed, or send when the relevant service is selected.
5.5

Loudspeaking Function

There are five options to activate the loudspeaking function:
• Press a Multifunction button, Navigation key, Hot key or Soft key defined as shortcut to a
"Phone call
see 8.3 Shortcuts
NOTE: The support for Multifunction button is dependent on what model of handset that
is used. For more information, see
• When receiving a call, press the soft key
function depending on its configuration of the In call function in WinPDM/Device
Manager.
• During a call, press the soft key
depending on its configuration of the In call function in WinPDM/Device Manager.
• During a call, put the handset in a charger. Requires that Loudspeaking is chosen in the In
Charger menu.
• This function can also be activated by selecting another answering method, that is,
"Automatically" and/or "Loudspeaking". See
5.6

Call Diversion

All calls; internal calls, external calls, calls when busy, or calls at no answer can be diverted to
another handset number. The diversion is made via the Calls menu > Call services > Divert
calls. See Divert Calls
In addition, an absence reason (for example "Lunch", "Meeting", "Trip" etc.) can also be set.
The absence reason is set via the Calls menu > Call services > Absence. See
Services on page 57.
NOTE: PBX settings for the call diversion must be set in order to show the Divert calls menu
in the handset. See the Configuration Manual for the handset (TD number: See
Documents
NOTE: If both diversion and absence reason are set, the absence reason is used.
Either can a Multifunction button, Soft key or Hot key be preprogrammed with a shortcut to
the diversion function or the absence reason/menu. See
NOTE: The support for Multifunction button is dependent on what model of handset that is
used. For more information, see
28 June 2016 / Ver. PA5
on page 77. For more information, see the Configuration Manual for the
17 Related Documents
"
function. When pressing the key/button, a predefined number is called,
on page 59.
on page 58.
on page 91).
1.2 Functions and Accessories
on page 91).
1.2 Functions and Accessories
. The Soft key might have another/no
. The Soft key might have another/no function
8.8.6 Answering
8.3 Shortcuts
TD 93119EN
on page 2.
on page 73.
8.2.9 Call
17 Related
on page 59.
on page 2.
33