Dect Location; Handset Users; System Administrators And Installers - ASCOM d62 Talker Configuration Manual

Configuration Manual
Ascom d62 DECT Handset
In addition, a system can also request the Base Station ID regardless if an alarm is sent or
not. See 5.22 Poll Location
In a template or Number in PDM/Device Manager, the parameter for activation is found at:
Location > Base station positioning
Note: The standby time for the handset is lower when Base station positioning is activated.

5.20 DECT Location

Note: This is a license dependent feature, see
The DECT location feature is used to keep track and report the location of DECT handsets. It
is implemented through DECT location devices, which transmit location information
continuously. The location information consists of a location ID and a Received Signal
Strength Indication (RSSI) threshold value. Location information is stored by handsets when
the handset RSSI is stronger than the location device RSSI threshold. The handset stores the
four last received location IDs and the time that has elapsed since the location IDs were
received.

5.20.1 Handset Users

For handset users, DECT location is used to indicate the location of the handset in critical
situations when the handset alarm button is pressed. DECT location is configured via the
PDM/Device Manager where the parameter for activation is found at:
Location > DECT location

5.20.2 System Administrators and Installers

For system administrators and location installers, the handset can be configured and used
to provide important RF information when provisioning, commissioning and analysing a
network of location devices:
• DECT location data
• DECT location indications.
DECT Location Data
To configure the handset to provide DECT location data, perform the following procedure:
1 Press the "Menu" soft key.
2 Select "Calls".
3 Select "Admin menu".
NOTE: The "Admin menu" is only visible if the Admin menu is activated. To activate
the Admin menu, see
4 From the Admin menu, select "Location info".
31 October 2013 / Ver. J
on page 34.
4.4 Upgrade Handset by License
6.1.1 Activating the Admin Menu
TD 92639EN
on page 11.
on page 57
32