Dect Info; Send Data; Loudspeaking Function; Call Diversion - ASCOM d62 User Manual

User Manual
Ascom d62 DECT Handset

5.4.17 DECT Info

DECT info is an advanced function intended for an administrator using the handset to
measure RF link and system parameters as part of a troubleshooting or site surveying
procedure. This option is only visible if the Admin menu is activated as described in section
11.1 Admin Menu
Handset for more information.

5.4.18 Send Data

User entered data can be sent from the handset by pressing a pre-programmed hot key or
soft key, or selecting a Service. Sent data can be used to initiate actions such as opening a
door or starting and stopping a machine. The data can either be predefined, entered after
the hot key or soft key is pressed, or send when the relevant service is selected.
5.5

Loudspeaking Function

There are five options to activate the loudspeaking function:
• Press a Multifunction button (not applicable for d62 Protector), Navigation key, Hot key
or Soft key defined as shortcut to a "Phone call
button, a predefined number is called, see
• When receiving a call, press the soft key
function depending on its configuration of the In call function in PDM/Device Manager.
• During a call, press the soft key
depending on its configuration of the In call function in PDM/Device Manager.
• During a call, put the handset in a charger. Requires that Loudspeaking is chosen in the In
Charger menu.
• This function can also be activated by selecting another answering method, that is,
"Automatically" and/or "Loudspeaking". See
5.6

Call Diversion

All calls; internal calls, external calls, calls when busy, or calls at no answer can be diverted to
another handset number. The diversion is made via the Calls menu > Call services > Divert
calls. See Divert Calls
In addition, an absence reason (for example "Lunch", "Meeting", "Trip" etc.) can also be set.
The absence reason is set via the Calls menu > Call services > Absence. See
Services on page 56 .
NOTE: PBX settings for the call diversion must be set in order to show the Divert calls menu
in the handset. See the handset's Configuration Manual.
NOTE: If both diversion and absence reason are set, the absence reason is used.
Either can a Multifunction button (not applicable for d62 Protector), Soft key, or Hot key be
preprogrammed with a shortcut to the diversion function or the absence reason/menu. See
8.3 Shortcuts
5.7

Emergency Calls

If configured in the PDM/Device Manager, any one of up to five predefined emergency
numbers can be called, even if the handset or keypad has been locked. For additional
information, see sections
Settings on page 69.
8 April 2016 / Ver. M
on page 75. See the Configuration Manual for the Ascom d62 DECT
on page 57.
on page 58.
8.8.2 Keypad Lock Settings
"
function. When pressing the key/
8.3 Shortcuts on page 58.
. The Soft key might have another/no
. The Soft key might have another/no function
8.8.6 Answering
on page 68 and
TD 92477EN
on page 72.
8.2.9 Call
8.8.3 Phone Lock
33