Handset Installation In Ip-Dect System Using Easy Registration; Manual Handset Installation In Dect System - ASCOM d62 Talker Configuration Manual

Dect handset
Hide thumbs Also See for d62 Talker:
Table of Contents

Advertisement

Configuration Manual
Ascom d62 DECT Handset
3.2.1

Handset Installation in IP-DECT System using Easy Registration

A handset can subscribe to an IP-DECT system automatically if the following are fulfilled:
• The IP-DECT system is configured for Easy Registration, see the Installation and
Operational Manual for your IP-DECT system.
• The handset extension number and IPEI are registered in the IP-DECT system, see the
Installation and Operational Manual for your IP-DECT system.
• The handset is not subscribed to any systems.
• The handset software is version 3.2.x or higher.
Subscribe
Subscribe the handset to the IP-DECT system. The subscription procedure is described in the
handset User Manual.
During the subscription procedure, the handset User ID is set automatically to the same as
the extension number. The User ID is used to identify the handset when it is connected to
PDM/Device Manager and is visible in the Number column.
Tip: The User ID can be viewed in the handset by navigating to the menu:
Admin menu > Device info > User ID.
See also examples of handset configurations that can be made in chapter
Configuration
3.2.2

Manual Handset Installation in DECT System

NOTE: The handset to be installed must not have any previous valid registrations. If it has a
valid registration, unsubscribe the handset.
Subscribe
1
Assign an extension number for the handset in the IP-DECT system. See the
corresponding manual for the IP-DECT system.
2
Subscribe the handset towards the IP-DECT system. The subscription procedure is
described in the handset User Manual.
During the subscription procedure, the handset User ID is automatically set to the
same as the extension number. The User ID is used to identify the handset when it is
connected to PDM/Device Manager and is visible in the Number column.
Tip: The User ID can be viewed in the handset by navigating to the menu:
Admin menu > Device info > User ID.
See also examples of handset configurations that can be made in chapter
Configuration
31 October 2013 / Ver. J
on page 18.
on page 18.
TD 92639EN
5 Handset
5 Handset
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the d62 Talker and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

D62 messengerD62 protector

Table of Contents