Advanced Functions - ASCOM d62 Talker Configuration Manual

Configuration Manual
Ascom d62 DECT Handset
PDM/Device Manager or by opening and editing the template file from the PDM
"Templates" tab
Parameter
New call
End current call
Switch call
Transfer call
Conference call
Callback
Call waiting
Contacts
DTMF
Decline call waiting Determines what is sent to PBX when user declines an incoming call if
Transfer to new
To locate the function and configure the associated parameter:
1 Navigate to System > System X > PBX Settings > In call functionality > <parameter
name> <value>
2 To remove the function from the In Call menu, delete the value of the parameter
associated with the function. To add a function that is not displayed, set the
parameter value associated with the function.
5.9.3

Advanced Functions

The administrator can configure the handset to allow access to the following advanced
functions during a call. These are functions intended for an advanced user such as an
installer using the handset to measure RF link and system parameters as part of a
troubleshooting or site surveying procedure.
Function
DECT Info
Location Info
These functions can be added to the handset In Call menu by activating the Admin Menu as
described in
31 October 2013 / Ver. J
Description
Start a new call during a conversation.
End a call.
Switch between calls.
Transfer a call.
Make a conference call.
May be requested if the called party is engaged. When the called
party becomes available, the calling party receives a callback from
the PBX.
May be requested if the called party is engaged. Notifies the called
party that a call from the calling party is waiting.
Open the handset contacts list.
When requested, enables the handset to send DTMF.
the user is already on another call.
NOTE: The "Decline call waiting" function is not displayed in the
handset In Call menu. Instead a new call screen is shown for the
second call where the option to accept or decline the call is shown. If
user accepts the call the parameter "Switch call" is used.
Performs an unattended transfer of the inbound call to another
party.
Description
Shows link and DECT system information
Shows location IDs and RSSI values received from location devices if
the handset has the appropriate DECT Location license and a DECT
location service is running
6.1.1 Activating the Admin Menu on page 57.
TD 92639EN
24