Device Management In Multiple Systems - ASCOM d62 Talker Configuration Manual

Dect handset

Hide thumbs Also See for d62 Talker:

Table of Contents

Configuration Manual

Ascom d62 DECT Handset

2.3

Device Management in Multiple Systems

When using a handset in multiple systems, the system that the handset is to be

synchronized with can be determined by the Device Manager in the Unite module. This

means that a software upgrade and handset configuration can only be applied in the

system where the handset synchronizes with the Device Manager.

The default setting depends on two conditions:

• if a handset has a valid subscription and is upgraded to software version 3.5.6 or

greater, the default setting is that the handset synchronizing with the Device Manager in

all systems.

• if a handset has no subscriptions and it is subscribed to the first system, the default

setting is the handset synchronizing with the Device Manager in that system (that is

System A).

NOTE: When changing the "Device Management system" parameter to another system, the

handset loses the connection to the IP-DECT system for a few seconds.

In the PDM or Device Manager, select the "Number" tab.

Select the handset to be configured.

In the Number menu, select "Edit parameters". A dialog window opens.

Select "Systems".

In the Device Management System drop-down list, select the system to be used for

device management.

31 October 2013 / Ver. J

TD 92639EN

Table of Contents

Do you have a question about the d62 Talker and is the answer not in the manual?

D62 messenger D62 protector