In Call Menu; Always Displayed; Normally Displayed - ASCOM d62 Talker Configuration Manual

Configuration Manual
Ascom d62 DECT Handset
3 Select "Common codes", enter the following:
• Activation prefix - the system specific activation prefix code required to activate
the absence (for example *23*)
• Activation suffix - the system specific activation suffix code required to activate
the absence (for example #)
• Deactivation - the system specific code required to deactivate the absence (for
example "#23#").
• PBX date format for user input - the PBX supported date format to be sent to the
PBX when activating an absence reason containing a date (for example
"Vacation"). The date in the handset is always entered in MMDD format. If the
parameter is set to DDMM, the handset automatically converts to the correct date
format.
4 Select "Lunch", "Meeting", "Trip", "Vacation", "Out" and/or "General absence X"; enter
the following:
• Activation code - the system specific code for an absence reason, for example
"0*".
• Name - enter name of absence reason (only for General absence). The name is
visible in handset.
• User input - specifies if time or date is required for the absence reason (only for
General absence).
5.9

In Call Menu

The In Call menu let a user access a number of functions during a call. Some functions are:

• Always displayed

• Normally displayed

• Advanced functions that may be included by the administrator.
5.9.1 Always Displayed
The following functions are always accessible during a call:
Function
Messaging
Microphone
The Messaging function may be hidden from the In Call menu via the PDM/Device Manager
in the following way:
1 Navigate to Customization > Visibility > Messaging
2 Set the value of the Messaging parameter to "Hide".
NOTE: The Messaging parameter may also be set to "Read only". This allows the user to
access the messaging function during a call but does not allow the user to delete sent
or received messages.
The Microphone function cannot be hidden or removed from the In Call menu.
5.9.2 Normally Displayed
These functions in this are normally displayed during calls. The administrator can add or
remove a function from the In Call menu by configuring the parameter associated with the
function. The following functions can be configured by selecting "Edit parameters" in the
31 October 2013 / Ver. J
Description
Displays the "Messaging" menu and messaging functions available
during a call.
Turn the microphone on or off
TD 92639EN
23