Dell 5110cn Service Manual page 425

RRP7.10 SENSOR NO TONER (K) (PL7.2.5)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove RIGHT SIDE COVER. (RRP1.7)
3) Remove LEFT SIDE COVER. (RRP1.12)
4) Remove COVER ASSY REAR. (RRP1.5)
5) Remove the connector (P/J704) from SENSOR NO TONER on DISPENSER ASSY (K).
6) Remove the hooks at four locations that fix DISPENSER ASSY (K) to SENSOR NO TONER.
7) Remove SENSOR NO TONER from DISPENSER ASSY (K).
[Replacement]
1) Attach SENSOR NO TONER to DISPENSER ASSY (K) and fix with the hooks at four
locations.
2) Attach the connector (P/J704) to SENSOR NO PAPER.
3) Attach COVER ASSY REAR. (RRP1.5)
4) Attach LEFT SIDE COVER. (RRP1.12)
5) Attach RIGHT SIDE COVER. (RRP1.7)
6) Attach TOP COVER FRAME. (RRP1.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 175