Id Print; Non-Genuine Mode; Maintenance - Dell 5110cn Service Manual

10.6 ID Print

The user name can be printed. The printing position can be selected from upper right, upper left, lower
right and lower left (only for PCL6).

10.7 Non-Genuine Mode

When life of toner cartridge has ended, the printer stops accepting request (life of toner cartridge is
counted by the counter in CRUM).
Taking into consideration that same users use refilled toner cartridge they get from re-manufacturers,
the printer can accept print request by the user's panel operation even if life of the toner cartridge has
ended.
Setting of toner cartridge can be made separately (setting of toner cartridge can not be made by color).
When the mode has changes so that the printer does not stop even after life of toner cartridge ends, the
printer displays a message on the operation panel to inform the user of the mode change.
When the printer operates in this mode, print image quality is not guaranteed. Also, remaining toner
level is not displayed (as CRUM data can not be guaranteed).

10.8 Maintenance

1) Firmware Update
The ESS and MPC firmware can be updated by the user.
Firmware can be updated using Windows PC with the dedicated utility.
Updated Firmware
ESS
MPC
MCU
*1: MCU can not be updated when ROM starts to be used for MCU.
2) Diagnostic Function
There are 2 types of diagnostic function as follows.
1) Auto Diagnostic: The printer is checked when it is turned on.
It is checked whether hardware (ROM, RAM, ASIC etc) operates properly.
2) Manual Diagnostic: Diagnosis is conducted using the operation panel.
The user can select the test items, such as Code ROM Test, Font ROM Test, EEPROM Test,
and Operation Panel Test, on the operation panel individually.
via USB
Available
Available
*1
Available
Windows
via 1284
Available
Available
Available
8 – 27
Chapter 8 Printer Specifications
via Network
(port9100)
Available
Available
Available