RIGHT FRONT COVER (PL1.1.22)
Release the latch and open OUTER DUPLEX ASSEMBLY (PL5.3.1) together with INNER
DUPLEX ASSEMBLY (PL5.2.1).
Remove a screw (silver, tap, 10mm) that fixes RIGHT FRONT COVER.
Release the hooks fixing RIGHT FRONT COVER at three locations.
Release the latch. Remove RIGHT FRONT COVER with OUTER DUPLEX ASSEMBLY fully
open state and with INNER DUPLEX ASSEMBLY half-open state.
Release the latch and open OUTER DUPLEX ASSEMBLY.
Match the bosses at three locations on RIGHT FRONT COVER to the holes of INNER
DUPLEX ASSEMBLY and push COVER FRONT ASSY. Insert the bosses into the holes and
fix the hooks at three locations.
Attach RIGHT FRONT COVER using a screw (silver, tap, 10mm).
Close OUTER DUPLEX ASSEMBLY.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 29