Dell 5110cn Service Manual page 403

RRP6.2 HSG ASSY BIAS (PL6.1.7)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove LEFT FRONT COVER. (RRP1.11)
3) Remove LEFT SIDE COVER. (RRP1.12)
4) Remove PWBA HVRS. (RRP9.9)
5) Remove two wires from the harness guide on HSG ASSY BIAS.
6) Remove four screws (silver, tap, 10 mm) that fix HSG ASSY BIAS from the printer.
7) Remove HSG ASSY BIAS from the printer.
[Replacement]
1) Attach HSG ASSY BIAS to the printer using the four screws (silver, tap, 10mm).
2) Pass the two wires through the harness guide to HSG ASSY BIAS.
3) Attach HIGH VOLTAGE POWER SUPPLY (HVPS). (RRP9.9)
4) Attach LEFT SIDE COVER. (RRP1.12)
5) Attach LEFT FRONT COVER. (RRP1.11)
6) Attach TOP COVER FRAME. (RRP1.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 153