RRP5.12 OUTPUT TRAY ACTUATOR (PL5.4.2)
[Removal]
1)
Remove FRONT COVER. (RRP1.3)
2)
Sag the midsection of OUTPUT TRAY ACTUATOR, remove the left and right shafts through
the mounting holes.
[Replacement]
1)
Sag the midsection of OUTPUT TRAY ACTUATOR, fit the left and right shafts through the
mounting holes.
2)
Attach FRONT COVER. (RRP1.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 131