Dell 5110cn Service Manual page 353

RRP5.2 TRANSFER ROLLER. (PL5.1.4)
[Removal]
The FUSER part is very hot. Take added care not to get burned when carrying out service
operation.
1) Release the latch and open INNER DUPLEX ASSEMBLY (PL5.2.1).
2) Pinch the left and right knobs that fixes TRANSFER ROLLER on INNER DUPLEX
ASSEMBLY to unlock them. Turn TRANSFER ROLLER backward.
3) Remove TRANSFER ROLLER upward from INNER DUPLEX ASSEMBLY.
[Replacement]
1) Match the projections at the left and the right on TRANSFER ROLLER and the groove of
INNER DUPLEX ASSEMBLY, put it.
2) Pinch the left and right knobs of TRANSFER ROLLER to turn it forward, then lock the knob
and attach TRANSFER ROLLER.
3) Close INNER DUPLEX ASSEMBLY.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 103