Dell 5110cn Service Manual page 273

RRP1.5 COVER ASSY REAR (PL1.1.17)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove RIGHT SIDE COVER. (RRP1.7)
3) Remove LEFT SIDE COVER. (RRP1.12)
4) Remove the connector (P/J166,167) on LOW VOLTAGE POWER SUPPLY (LVPS) (PL9.1.6).
5) Release the clamp to remove the harness.
6) Remove the CORE (PL1.1.34) from the harness of the FAN.
7) A little lifting up COVER ASSY REAR, remove it backward.
[Replacement]
1) Attach the hook located at seven locations on COVER ASSY REAR to the printer.
2) Pass the harness of the FAN through the CORE.
3) Put the harness through the clamp.
4) Attach the connector (P/J166,167) to LOW VOLTAGE POWER SUPPLY (LVPS).
5) Attach LEFT SIDE COVER. (RRP1.12)
6) Attach RIGHT SIDE COVER. (RRP1.7)
7) Attach TOP COVER FRAME. (RRP1.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 23