Dell 5110cn Service Manual page 349

RRP4.11 ROLL TURN MSI. (PL4.2.10)
[Removal]
1) Remove REGISTRATION ASSEMBLY. (RRP4.6)
2) Remove CLUTCH TURN. (RRP4.10)
3) Remove BEARING that fixes the right side shaft of ROLL TURN MSI to CHUTE REGI.
4) Remove the E-ring that fixes the left side shaft of ROLL TURN MSI to CHUTE REGI, remove
BEARING EARTH.
5) Shift ROLL TURN MSI from CHUTE REGI to the right, remove it downward.
[Replacement]
1) Attach ROLL TURN MSI to CHUTE REGI.
2) Insert BEARING EARTH into the left side shaft of ROLL TURN MSI and fix it using the E-
ring.
3) Insert BEARING into the right side shaft of ROLL TURN MSI.
4) Attach CLUTCH TURN. (RRP4.10)
5) Attach CLUTCH ASSY REGI. (RRP4.6)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 99