Dell 5110cn Service Manual page 36

Problem Error Message
Replace Fuser
010-351
Flip
Replace
Fuser
Insert Fuser
010-317
Flip
Reseat Fuser
Ready to Print
010-421
Flip
Fuser
Replace Fuser
Soon
Fuser Type
010-358
Flip
Reseat
Fuser
CRUM ID
093-964
Flip
Reseat
Fuser
Transfer Roller
094-911
Flip
Replace
Transfer Roller
Ready to Print
094-422
BTR
Flip
Replace Transfer
Roller Soon
BTR Not Detected
094-910
Flip
Insert/Reseat
Transfer Roller
Error Contents
<IOT Fuser Life Over 2>
The fuser life over is detected.
The value of the Fuser counter has reached the
replacement time.
<IOT Fuser Detached>
The fuser detached is detected.
<Fuser Life Warning>
The fuser life warning is detected.
The value of the Fuser counter is going to reach the
replacement time.
<IOT Fuser Type Error>
The fuser type error is detected.
The CRUM data the MCU read was the type of the
other company.
<IOT CRUM ID Error>
The fuser CRUM ID error is detected.
The Fuser CRUM ID read by the MCU is different
from the one that was recorded.
<IOT BTR Life Over>
The BTR life over is detected.
The value of the BTR counter has reached the
replacement time.
<BTR Life Warning>
The BTR life warning is detected.
The value of the BTR counter is going to reach the
replacement time.
<IOT BTR Detached>
The BTR detached is detected.
The CTD (ADC) Sensor detected the BTR
detached.
1 – 19
Chapter 1 Troubleshooting
FIP to be
referred
FIP-49
FIP-50
FIP-51
FIP-52
FIP-52
FIP-53
FIP-54
FIP-55