Ask the operator about trouble status.
Is operator's operating method correct?
Turn off and turn on the Power.
Does error still occur when print
is done by the problem mode?
When status code or LCD
display is displayed:
When image quality trouble
When abnormal noise
Instruct how to operate
End of work
Refer to "3.2 Status Code List."
Refer to "3.3 LCD Display."
Refer to "3.4 Error Code FIP."
Refer to "3.5 Entry Chart for Image
Refer to "3.5 Image Quality FIP."
Refer to "4.1 Entry Chart for
Abnormal Noise Troubleshooting."
Refer to "4.2 Operation Mode Table."
1 – 7
Chapter 1 Troubleshooting