Dell 5110cn Service Manual page 219

- About Diag. Matrix
The diagnosis number differs depending on the composition of the Optional Feeder(s) that was
installed to the printer. Refer to Diag Matrix table below.
Diag Matrix for Option Feed Motor 1/2 (Forward) (DO-24/-25/-26/-27/-2d/-2e/2f/-30)
Printer
1. Standard
2. 500 Sheets
(One Tray Opt. Feeder)
3. 500 Sheets
4. 500 Sheets
(Two Tray Opt. Feeder)
Diag Matrix for Option Feed Motor 1/2 (Forward-Double) (DO-28/-29/-2a/-2b/-31/-32/33/-34)
Printer
1. Standard
2. 500 Sheets
(One Tray Opt. Feeder)
3. 500 Sheets
4. 500 Sheets
(Two Tray Opt. Feeder)
Diag Matrix for Cassette 2/3/4 Turn Clutch (DO-58/-5c/-60)
Printer
1. Standard
2. 500 Sheets
(One Tray Opt. Feeder)
3. 500 Sheets
4. 500 Sheets
(Two Tray Opt. Feeder)
Diag Matrix for Cassette 2/3/4 Feed Solenoid (DO-5a/-5e/-62)
Printer
1. Standard
2. 500 Sheets
(One Tray Opt. Feeder)
3. 500 Sheets
4. 500 Sheets
(Two Tray Opt. Feeder)
Paper Tray Composition
One Tray Opt.
Standard Only
Feeder
--
DO-24/-25/
--
-26/27
--
Paper Tray Composition
One Tray Opt.
Standard Only
Feeder
--
DO-28/-29/
--
-2a/-2b
--
Paper Tray Composition
One Tray Opt.
Standard Only
Feeder
--
-- DO-58
--
--
Paper Tray Composition
One Tray Opt.
Standard Only
Feeder
--
-- DO-5a
--
--
2 - 41
Chapter 2 Operation of Diag.
Two Tray Opt.
Feeder
-- --
--
DO-24/-25/
--
-26/27
Two Tray Opt.
Feeder
-- --
--
DO-28/-29/
--
-2a/-2b
Two Tray Opt.
Feeder
-- --
--
-- DO-58
-- DO-5c
Two Tray Opt.
Feeder
-- --
--
-- DO-5a
-- DO-5e
One Tray +
Two Tray Opt.
Feeders
--
DO-24/-25/
-26/27
DO-2d/-2e/
-2f/30
One Tray +
Two Tray Opt.
Feeders
--
DO-28/-29/
-2a/-2b
DO-31/-32/
-33/-34
One Tray +
Two Tray Opt.
Feeders
--
DO-58
DO-5c
DO-60
One Tray +
Two Tray Opt.
Feeders
--
DO-5a
DO-5e
DO-62