Test Print; Executing Test Print; No Image [Iot]; Test Pattern 600[Iot] - Dell 5110cn Service Manual

4.3 Test Print

Print an internal test pattern of the printer. If paper jam or paper empty occurs during the print,
the test waits until they are resolved.

4.3.1 Executing test print

1) Turn off the power.
2) Turn on the power while holding down "
3) Release the fingers from these keys when "Diagnosing..." is displayed.
4) The "Customer Mode" and "ESS Diag" are displayed. (Entered the Diag. mode.)
5) Press " " key to select "Test Print", and then press "
6) Press " " or "
7) Press " " key twice to execute the test.
To exit the test or to returning to one step higher menu, press "CANCEL" key.

4.3.2 No Image [IOT]

This function feeds the paper without printing.

4.3.3 Test Pattern 600[IOT]

This function prints the MCU PWB built-in 600 dpi pattern. It checks the print function of the
IOT.
" key to select the test item.
2 - 61
" and " " keys.
" key.
Ida_Sec02_002FA
Chapter 2 Operation of Diag.