System Snmp Trap Configure <Agent_Ip; System Snmp Trap Delete <Agent_Ip; System Snmp Users Configure <User - D-Link DWC-2000 Cli Reference Manual

7 to_address
4.13 system snmp trap configure <agent_ip>
Command
S.No
Name
<agent_ip>
1
2 save
3 exit
4 cancel
5 agent
6 snmp_version Snmp Version v1/v2/v3
7 port
8 community
4.14 system snmp trap delete <agent_ip>
Command
S.No
Name
1 <agent_ip>
4.15 system snmp users configure <user>
S.No Command Name
1 <user>
allow the IP to grant access to a
particular machine.
Set the Ending IP in case of
range.
Description
SNMP trap configuration mode.
Save SNMP trap configuration
changes.
Save SNMP trap configuration
changes and exit current mode.
Roll back SNMP configuration
changes.
The IP address of the SNMP agent.
Which SNMP trap port the trap
messages will be sent to.
The community string to which the
agent belongs. Most agents are
configured to listen for traps in the
Public community.
Description
Delete a SNMP trap
configuration.
Description
SNMP v3 User list configuration
changes.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
Type and Description
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-255
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-255
String
Port number
String
Type and Description
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
63
Type and Description
SNMPv3 user list type.