Snmp; Configure Snmp V3 User List - D-Link DWC-1000 User Manual

Section 9 - Maintenance
Path: Maintenance > Management > SNMP
SNMP is an additional management tool that is useful when multiple controllers in a network are being
managed by a central Master system. When an external SNMP manager is provided with this controller's
Management Information Base (MIB) file, the manager can update the controller's hierarchal variables to view
or update configuration parameters. The controller as a managed device has an SNMP agent that allows the
MIB configuration variables to be accessed by the Master (the SNMP manager). The Access Control List on the
controller identifies managers in the network that have read-only or read-write SNMP credentials. The Traps List
outlines the port over which notifications from this controller are provided to the SNMP community (managers)
and also the SNMP version (v1, v2c, v3) for the trap.
1. Go to Maintenance > Management > SNMP page, and click SNMP tab.
2. Right-click either admin or guest and select Edit.
D-Link DWC-1000 User Manual

SNMP

Configure SNMP v3 User List

348