Configure Snmp Trap List - D-Link DWC-1000 User Manual

Section 9 - Maintenance
2. Set the security level.
• noAuthnoPriv: only requires a username match for authentication
• authNoPriv: Provides authentication based on the MD5 or SHA algorithms.
• authPriv: Provides authentication based on the MD5 or SHA algorithms as well as encryption
privacy with the DES 256-bit standard.
3. Click Save.
1. Go to Maintenance > Management > SNMP > SNMP Trap List tab.
2. Click Add SNMP Trap.
3. Complete the fields (refer to the table below).
4. Click Save.
Field
IP Address
Port
Community
Authentication Type
D-Link DWC-1000 User Manual

Configure SNMP Trap List

The IP Address of the SNMP trap agent.
The SNMP trap port of the IP address to which the trap messages will
be sent.
The community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
The SNMP version used by the trap agent. The choices are v1, v2c, or v3.
Description
349