Rear Panel - Hand Held Products Dolphin 9500 User Manual

Rear Panel

Auxiliary Battery Well
The HomeBase enables you to charge an additional Li-ion battery pack independently of the terminal well. This feature
ensures that you can always have a fully-charged battery for your Dolphin terminal. See
page 12-5.
USB Port
This USB Port is full-speed and 2.0 compliant. Using a USB cable, you can connect the HomeBase to a peripheral
device, such as a desktop computer or printer. When the Dolphin terminal is seated in the terminal well, it is connected
to the peripheral device via the HomeBase.
The USB port on the HomeBase requires that you use ActiveSync 3.7 or higher.
RS-232 Port
Use a 9-pin, RS-232 cable from HHP to connect this port to a peripheral device for RS-232 data communication. For
more information, see
DC Power Jack
Use a power cable from HHP to supply power to this power jack. For more information, see
on page 12-5.
12 - 4
USB Port RS-232 Port
HomeBase Serial Connector
DC Power Jack
on page 12-6.
Dolphin® 9500 Series Mobile Computer User's Guide
Auxiliary Battery Well
Powering the HomeBase
Powering the HomeBase
on