Status Tab - Hand Held Products Dolphin 9500 User Manual

Dolphin 9500 series
Hide thumbs Also See for Dolphin 9500:
Table of Contents

Advertisement

Status Tab

802.11b Settings always opens to the Status tab, which displays the current 802.11b settings.
Field
Description
Shows the RF channel currently used by the radio.
Current Channel
Shows the current transmit rate. This can be 1 Mbps, 2 Mbps, 5.5 Mbps, or 11 Mbps.
Current TX Rate
Tap this button to disable/enable the radio.
Disable/Enable
Radio
Tap this button to start a rescan process to search for an AP with a stronger signal in the network.
Rescan
Displays the signal to noise ratio.
Link Quality
Displays the signal strength of the receiver.
Strength
Displays the IP address of the radio. Verify configuration information with your network administrator.
IP Address
Tap this button to reapply IP the address from the DHCP server when automatic DHCP is enabled.
Renew IP
Displays the Network Name and the MAC address of:
State
- the access point the radio is associated with in AP mode, or
- the creator of IBSS into which the radio is joined in peer-to-peer (Ad-Hoc) mode.
After an SSID is chosen, this field name changes to "IBSS ID."
Dolphin® 9500 Series Mobile Computer User's Guide
7 - 3

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dolphin 9550Dolphin 9501Dolphin 9551

Table of Contents