Client Menu
To open the client menu, tap Client in the command bar along the bottom of the window.
Menu Item
Close
Start/Stop
Restart
Configure
Install Protocol
Exit
7 - 20
Tapping this item...
Closes the Client's interface, while leaving the client running.
Starts or stops 802.1X authentication. After you finish the initial configuration, tap the network
interface and tap Start. If the port is already active, tap Stop first, then Start to force the program to
read the new configuration file.
Same as a Stop followed by Start. Tap this when you receive a notice such as the following:
Opens the Configuration screen displaying the User tab.
Selecting this option binds the 802.1X protocol to the WLAN adapter currently installed on the device.
The WLAN adapter then appears in the port list. For more information about network adapters, see
Network Cards
on page
7-35.
Terminates the client, which stops the 802.1X protocol.
Dolphin® 9500 Series Mobile Computer User's Guide