Download Print this page

Hand Held Products DOLPHIN 7600 User Manual

Hand held products charger user manual.
Hide thumbs

Advertisement

User's Guide
®
®
®
with Microsoft
Windows
CE 5.0

Advertisement

   Related Manuals for Hand Held Products DOLPHIN 7600

   Summary of Contents for Hand Held Products DOLPHIN 7600

  • Page 1

    User’s Guide ® ® ® with Microsoft Windows CE 5.0...

  • Page 2

    Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Hand Held Products.

  • Page 3: Table Of Contents

    Soft Reset (Warm Boot) ... 3-20 Hard Reset (Cold Boot) ... 3-20 Suspend Mode... 3-20 Changing the Memory Allocation... 3-21 Format IPSM... 3-21 Dolphin 7600 Terminal Technical Specifications... 3-22 Chapter 4 - Using the Keyboards Overview ... 4-1 Suspend/Resume... 4-1 Function Keys... 4-2 Modifier Keys...

  • Page 4

    29-Key Numeric Keyboard ...4-4 Navigation Keys...4-4 Hardware Application Buttons...4-5 Toggling Between Alpha and Numeric Modes...4-6 29-Key Blue Key Combinations (Alpha Mode) ...4-7 29-Key Shift Functionality in Numeric Mode ...4-7 29-Key Red Key Combinations ...4-8 38-Key Alpha Keyboard...4-9 Toggling Between Alpha and Numeric Modes...4-9 38-Key Red Key Combinations ...4-10 38-Key NUM Lock Mode ...4-11 Chapter 5 - Using the Image Engine...

  • Page 5

    Mounting the Dolphin HomeBase ...8-5 Bottom Panel Dimensions ...8-6 Dolphin HomeBase Technical Specifications ...8-7 Chapter 9 - Dolphin QuadCharger Overview ...9-1 Front Panel ...9-1 Back Panel ...9-2 Supplying Power to the QuadCharger ...9-2 Battery Charging...9-3 Recommendations for Storing Batteries...9-3 Mounting the QuadCharger ...9-4 Troubleshooting...9-5 Dolphin QuadCharger Technical Specifications ...9-6 Chapter 10 - Dolphin Mobile Mount...

  • Page 6

    Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 7: Chapter 1 - Agency Approvals

    Dolphin 7600 Terminals with 802.11b/g and/or Bluetooth Dolphin 7600 RF terminals are designed to comply with the most current applicable standards on safe levels of RF energy developed by the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) and has been recommended for adoption by the Federal Communications Commission (FCC).

  • Page 8: Regulatory And Safety Approvals For All Dolphin Terminals

    5627 BT Eindhoven The Netherlands Hand Held Products shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. Laser Safety Label...

  • Page 9: Fcc Compliance

    The correction is the responsibility of the user. Use only shielded data cables with this system. In accordance with FCC 15.21, changes or modifications not expressly approved by Hand Held Products, Inc. may void the FCC authorization to operate the equipment.

  • Page 10

    Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. For European Community Users Hand Held Products complies with Directive 2002/69/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).

  • Page 11

    The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration.

  • Page 12

    1 - 6 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 13: Chapter 2 - Getting Started

    Step 1. Install the Main Battery Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by Hand Held Products in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or bat Step 2.

  • Page 14: Desktop

    Step 3. Boot the Terminal Windows CE The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process. When the boot process is complete, the Windows Mobile The terminal begins booting as soon as power is applied and runs by itself.

  • Page 15: Icons In The Command Bar

    Icons in the Command Bar Command Bar (see page 2-2) contains a number of icons that indicate the status of various functions on the terminal. Status Icon Meaning Opens the Start menu. Icons Between the Arrows Because there may be more icons than the device can display, use the left and right arrows to scroll through the icons. Accesses the Bluetooth radio.

  • Page 16

    Pop-Up Menus With pop-up menus, you can quickly choose an action for an item. 1. Tap and hold the stylus on the item name. The pop-up menu appears. 2. Lift the stylus, and tap the action you want to perform. The contents of pop-up menus change according to the program you’re in.

  • Page 17: Chapter 3 - Terminal Hardware Overview

    Terminal Hardware Overview The Dolphin 7600 includes a number of standard terminal configurations as well as charging and communication peripherals and accessories to maximize the efficiency of your application setting. Standard Terminal Configurations There are two standard Dolphin 7600 configurations: Dolphin 7600 WPAN •...

  • Page 18: Front Panel Features

    3-3. Dolphin 7600 devices ship with a screen protector already installed over the touch screen lens to help prevent damage to the touch screen. Do NOT remove this screen protector before initial use. Hand Held Products recommends using screen protectors, especially for applications that require high-volume interfacing with the touch screen.

  • Page 19: Display Backlight

    Display Backlight The touch screen display has a backlight that is programmed to turn off after a specified period of time that the device is idle. To change the default timeout parameters, tap Start > Settings > Control Panel > Display > Backlight tab. To adjust the intensity of the backlight, tap Start >...

  • Page 20: Using Screen Protectors

    Hand Held Products also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than 0.8mm. Use of the Hand Held Products stylus included with the terminal is recommended at all times.

  • Page 21

    3. Carefully apply the flat edge of your plastic card to the upper right corner of the touch panel. Catch the edge of the screen protector and pull it up and away from the touch panel. Credit Card Screen Protector Touch Panel 4.

  • Page 22

    Installing Your Screen Protector When installing a new screen protector, use a flat plastic card (such as a credit card) to apply the screen protector smoothly and remove any air bubbles. Note: If you have one, you can also use the small plastic squeegees designed for touch panels. 1.

  • Page 23

    4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel. Note: To reposition the screen protector, lift up gently and reapply. 5.

  • Page 24

    6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Credit Card Screen Releasing Paper Protector Touch Panel 7. Use the card as necessary to smooth out any air pockets or bumps after application. Press gently but firmly. 8.

  • Page 25

    11. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth. 12. Press the Backlight key to wake the terminal again. 13. For maximum performance, recalibrate the screen. Tap Start > Control Panel > double-tap Stylus > Calibration tab. 14.

  • Page 26: Back Panel Features

    • 500Hz–67db • 1KHz–72db • 4KHz–72db Stylus Slot Dolphin 7600 terminals ship with a stylus inserted. Store the stylus in this slot when you’re not using it; see the Stylus on page 2-3. 3 - 10 Accessory Attachment Finger Saddle...

  • Page 27: Side Panel Features

    The IrDA (Infrared Data Association) port communicates with IrDA-enabled devices such as PCs, printers, modems, or other Dolphin 7600 terminals. Maximum data transfer speed is 115 Kbps. You access IrDA communication functionality in the Bluetooth Manager. For more information, see 6-8.

  • Page 28: Top Panel Features

    The angled image engine reads and decodes most popular bar code symbologies and takes images like a digital camera. For more information, see Installing Memory Cards The Dolphin 7600 supports Secure Digital (SD) memory cards of the following capacities: • 256 MB • 512 MB •...

  • Page 29

    4. When the access door is open, slide the SD card into the appropriate slot until it clicks into place. SD cards must be inserted with the label side facing forward (toward the touch screen). Note: To remove an installed SD card while the access door is open, tap on the edge lightly to unlock the card; the card will pop out just enough for you to grab its edge and pull it out.

  • Page 30: Bottom Panel Features

    Bottom Panel Features I/O Connector Hand Strap Slot There is an adjustable, elastic hand strap available for purchase with the Dolphin 7600 terminal. When installing the hand strap, you loop the elastic strip through this slot. For instructions, see I/O Connector The I/O mechanical connector is designed to work exclusively with Dolphin 7600 peripherals and cables.

  • Page 31: Using The Accessory Attachment

    Attaching the Hand Strap The accessory attachment can also be used to attach the Dolphin 7600 hand strap available from Hand Held Products. Remove the accessory attachment and thread the hand strap hook underneath. Then, fasten the accessory attachment to the back panel.

  • Page 32: Dolphin 7600 Peripherals

    For more information, see Dolphin QuadCharger Dolphin 7600 Accessories Each of the following items is sold separately to enhance your Dolphin 7600 terminal’s capabilities. Protective Enclosure This enclosure wraps around the terminal to protect it from wear and tear. Li-ion Battery Packs The available Li-ion battery packs provide the main power supply for the terminal.

  • Page 33: Battery Power

    Main Battery Pack Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by Hand Held Products in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or bat...

  • Page 34

    • Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to hold an adequate charge. • If you are not sure the battery or charger is working properly, please send it to Hand Held Products or an authorized Hand Held Products service center for inspection.

  • Page 35

    Internal Backup Battery Located inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery. The internal backup battery prevents the terminal from being reset when you remove the main battery pack. This battery retains RAM data and allows the real-time clock to remain operational for up to 30 minutes. If the terminal is left without the main battery pack for more than 30 minutes, the internal backup battery discharges and needs to be recharged to function according to specifications.

  • Page 36: Resetting The Terminal

    Resetting the Terminal There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the device without losing RAM data. You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software applications that require a reboot, or 3) after making changes to certain system settings.

  • Page 37: Changing The Memory Allocation

    Changing the Memory Allocation You can adjust file storage vs. program memory in System Properties. 1. Tap Start > Settings > Control Panel > Memory tab. 2. Move the slider to adjust the memory allocation and tap OK. The changes take effect immediately. Format IPSM “IPSM”...

  • Page 38: Dolphin 7600 Terminal Technical Specifications

    SDK for C/C++, C# and Visual Basic developers for Windows CE 5.0 Environment (Requires Visual Studio 2005 Professional Editions or higher) Supported Software PowerNet™ Terminal Emulation (TNVT, 3270, 5250), Hand Held Products MSM (remote device management), and ITScriptNet Installed Applications Hand Held Products Power Tools and Demos and ITScriptNet Ready-To-Go applications...

  • Page 39

    Dolphin 7600 Terminal Technical Specifications Construction High impact resistant PC/ABS housings Magnesium alloy internal chassis with component shock mounts Structural 4 ft. (1.2m) multiple drops to concrete, all axis, across operating temperature range Air: Direct: +/- 8k Vdc Environmental IP54 rating Dimensions 7 in.

  • Page 40

    3 - 24 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 41: Chapter 4 - Using The Keyboards

    Using the Keyboards Overview There are two keyboard options: a 29-key keyboard and the 38-key keyboard. 29-Key Numeric Keyboard SCAN PQRS B K S P The buttons are recessed under the overlay for maximum durability and the panel is backlit for maximum viewability in various lighting conditions.

  • Page 42: Function Keys

    Function Keys Function keys appear on both keyboards and perform specific functions. Name Function Backlight Toggles the keyboard backlight on and off. Backspace Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Escape Cancels an action.

  • Page 43: Alpha/numeric Indicator

    Alpha/Numeric Indicator The command bar on the screen features an icon that indicates the alpha/numeric status of the keyboard. This icon changes when the keyboard status changes. Icon Keyboard Status The keyboard is in lowercase alpha mode only for the next key pressed. The keyboard reverts to the mode it was in prior to the switch for the next key pressed.

  • Page 44: 29-key Numeric Keyboard

    29-Key Numeric Keyboard Escape Navigation Keys Backspace Backlight Navigation Keys Located in the center of each keyboard for easy access with either hand, the navigation keys enable you to move the cursor through application screens. Description Move the cursor up one row or line. Move the cursor down one row or line.

  • Page 45: Hardware Application Buttons

    Hardware Application Buttons These four buttons are programmed to launch software applications from the Desktop. To customize these settings, tap Start > Settings > Control Panel > double-tap Buttons Buttons Column Matching Hardware Button P1—P4 Buttons P1—P4 marked on the overlay. Left Left side button;...

  • Page 46: Toggling Between Alpha And Numeric Modes

    Toggling Between Alpha and Numeric Modes The 29-key keyboard defaults to numeric mode, which means that the keyboard boots up to numeric mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys.

  • Page 47: 29-key Blue Key Combinations (alpha Mode)

    29-Key Blue Key Combinations (Alpha Mode) Tap the Blue modifier key to switch to alpha mode for the next key pressed. Double-tap the Blue modifier key to switch to alpha mode permanently. Functions If the keyboard is in numeric mode, tap the Blue key once to achieve the following: Key Combination Blue + Up Arrow Blue + Down Arrow...

  • Page 48: 29-key Red Key Combinations

    29-Key Red Key Combinations Special Characters Functions 4 - 8 Key Combination Character Red + Left Arrow Red + Right Arrow Red + BKSP Red + SP Red + . Red + P1 Red + P2 Red + P3 Red + P4 Key Combination Function Red + ESC (hold)

  • Page 49: 38-key Alpha Keyboard

    38-Key Alpha Keyboard Navigation Keys Backspace Escape Shift Backlight Toggling Between Alpha and Numeric Modes The 38-key keyboard defaults to lowercase alpha mode, which means that the keyboard boots up to lowercase alpha mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys.

  • Page 50: 38-key Red Key Combinations

    38-Key Red Key Combinations Key Combination Red + Down Arrow Red + Up Arrow Red + Left Arrow Red + Right Arrow Red + Left Side Button Red + Right Side Button Red + ESC (hold) Red + TAB (hold) Red + A Red + F Red + K...

  • Page 51: 38-key Num Lock Mode

    38-Key NUM Lock Mode • To switch to numeric mode for the next key pressed, tap the NUM key once. • To lock into numeric mode, double-tap the NUM key. • If locked in numeric mode, double-tap NUM key again to switch back to alpha mode. Numbers Special Characters Special Functions...

  • Page 52

    4 - 12 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 53: Chapter 5 - Using The Image Engine

    1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images, such as signatures and pictures of damaged inventory. The image engine is angled downward. Available Image Engines Dolphin 7600 terminals are equipped with 5300 Standard Range (5300SR) image engines. Depth of Field 5300 Standard Range (5300SR) 8.3 mil...

  • Page 54: Supported Bar Code Symbologies

    Supported Bar Code Symbologies The Dolphin 7600 image engines support the following bar code symbologies: Symbology Type Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (PARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code...

  • Page 55: Activating The Engine

    Activating the Engine When a scanning application is open, press the Scan key side buttons (see Side Button on page 3-11), which are programmed to activate the image engine in a scanning application by default. Using Demos Dolphin Demos are software utilities loaded on all Dolphin terminals that demonstrate the advanced features of the terminal. There are two Demos feature the image engine: Image Demo and Scan Demo.

  • Page 56

    Sample Bar Codes You can use the following bar codes to verify decoding: Sample 128 Code 128 Omni-Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code.

  • Page 57: Capturing Images

    Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing and has a slightly degraded appearance compared to the captured image.

  • Page 58

    5 - 6 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 59: Communication Options

    ActiveSync communication. For more information, see ActiveSync Communication Wireless Radios (Wireless Communication) Dolphin 7600 terminals can be equipped with an 802.11b/g or Bluetooth radio or a combination of these radios. For more information, see Wireless Radios IrDA Port (Wireless Communication) The IrDA port enables the Dolphin to transmit data via pulses of infrared light to and from other IrDA-compliant devices, such as printers, workstations, and even other Dolphin terminals.

  • Page 60: Connecting The Usb Cable

    Connecting the Power Cable The power port on the back end of the USB connector fits the power cable that comes with each Dolphin 7600 device. To charge the device while communicating, connect the power cable to the power port.

  • Page 61: Activesync Communication

    When communicating via ActiveSync, your terminal must be connected to the host workstation with a communication peripheral sold/manufactured by Hand Held Products, such as the Dolphin HomeBase or Dolphin Charge/Communication cable. Use of any peripheral not sold/manufactured by Hand Held Products may damage your terminal and will void the warranty.

  • Page 62

    Setting Up the Dolphin Terminal The Dolphin terminal defaults to USB communication out of the box. To verify and/or change the default setting, tap Start > Settings > Control Panel > PC Connections.) Must be checked to connect with a workstation. Displays the current connection setting.

  • Page 63

    2. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 3. Connect the terminal to the workstation via Hand Held Products communication peripheral. If the File is an Installer An installer program is one that installs to the workstation and the terminal simultaneously;...

  • Page 64: Wireless Radios

    Configuring the WLAN Radio The WLAN radio is configured in the Hand Held Products WLAN Security Supplicant which you access by double-tapping the program icon in the command tray on the Today screen For complete configuration instructions, download the Hand Held Products WLAN Security Supplicant User’s Guide from www.handheld.com.

  • Page 65: Adding Programs From The Internet

    Adding Programs From the Internet When you have established a network connection (whether via modem or wireless radio), you can access the Internet and download additional software programs. When selecting programs, verify that the program and version of the program are designed for Windows CE 5.0 and the terminal’s processor.

  • Page 66: Infrared Communication

    Infrared Communication The BT Service tab beams files and data between the terminal and other devices equipped via the IrDA port. The maximum data transfer speed is 115 Kbps. IrDA Port Location Transferring Files and Information Note: We recommend disabling the Bluetooth radio before transferring data via infrared. If the Bluetooth radio remains enabled, the Beam File function will pick up MAC addresses as well as IrDA ports.

  • Page 67

    6. Select a device in the list and tap Tap to Send. 7. As the file gets ready to send, the button at the bottom reads “Pending…” 8. While the file is transmitting, the button at the bottom reads “Sending…” and the command bar displays the percentage sent.

  • Page 68

    6 - 10 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 69: Chapter 7 - Bluetooth Manager

    Bluetooth Manager Overview Each Dolphin 7600 contains a Bluetooth radio whose driver installs each time the device boots up. Enabling the Bluetooth Radio Single-tap the Bluetooth icon in the command bar Tap Start > Programs > Bluetooth Manager and tap the ON button to activate the Bluetooth radio.

  • Page 70: Setting Tab

    Setting Tab Field Description Power This setting enables and disables the radio. BT Device ID Address The MAC address from the radio driver. Name The first time you open the Bluetooth manager, the default name of the Dolphin device appears. Rename Click this button to type in a unique name for the Dolphin terminal.

  • Page 71: Serial Port Tab

    Serial Port Tab On the Serial Port tab, you can register virtual COM server ports used by the Dolphin terminal to host its Bluetooth services. You can also register client ports used by the Dolphin terminal to access the Bluetooth services of other devices. Field Description Registered Bluetooth Serial Ports: This list contains the current COM ports in use.

  • Page 72: Connecting To Bluetooth Printers

    Connecting to Bluetooth Printers To connect to a Bluetooth printer, you need to register that printer as a new client port on the Serial Port tab. 1. In the Bluetooth Manager, tap the Serial Port tab and tap Register New Client Port. 2.

  • Page 73

    5. Select Serial Printer and tap OK. 6. Select COM from the COM Prefix drop-down list. 7. Select the appropriate COM port number from the COM Index drop-down list. Dolphin® 7600 User’s Guide Rev D 7 - 5 10/18/2007...

  • Page 74

    8. Tap OK. When you have successfully connected, a Registered O.K. dialog box appears. 9. On the Serial Port tab, verify that the COM port is connected to the printer. (The MAC address of the printer will appear in the Server Addr column.) 7 - 6 Rev D Dolphin®...

  • Page 75: Connecting To Other Bluetooth Devices

    Connecting to Other Bluetooth Devices 1. Power on the Bluetooth radio and tap the BT Service Tab. 2. Tap Scan Device Services, then Scan Device on the Scan Device window. The Bluetooth Manager scans for Bluetooth devices and services in range and displays them on the Scan Device Window. Note: To see a list of what the icons on this window mean, see 3.

  • Page 76

    7. On the Scan Device window, double-tap on the same service and select Active on the popup menu. The service must be active to use as a wireless connection. 8. The service will now appear with a checkmark to indicate that it’s an active connection Note: For more information about the popup menu, see Scan Device Window Found devices appear with a key icon that indicates whether it’s a trusted or untrusted device.

  • Page 77

    Popup Menu Double-tap on a found device and a popup menu appears that enables you to connect to that device and use the service. Menu Item Description Trusted &/or Changes the found device to a trusted or untrusted device. Untrusted Untrusted devicesAppear with a Trusted devices Appear with a Depending on the device and service selected, you may need to authenticate when changing an...

  • Page 78: Bluetooth Activesync

    Bluetooth ActiveSync 1. On the BT Service tab, tap Scan Device Service and retrieve a device with ActiveSync services 2. You need to activate the service. Double-tap on the service and select Trusted, then Active on the popup menu. Note: You may need to authenticate the connection by entering a PIN. If not, tap No on the authentication popup window. For more details, see Connecting to Other Bluetooth Devices on page...

  • Page 79: Chapter 8 - Dolphin Homebase

    Hand Held Products will void the warranty and may damage the terminal. Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by Hand Held Products in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or bat Dolphin®...

  • Page 80: Front Panel

    Front Panel Terminal Well Terminal Well Place the Dolphin terminal in this well to communicate with a host device, power the terminal, and charge its battery. Dock LED Turns solid green when the Dolphin terminal is properly seated in a powered HomeBase. When this light is on, the terminal is connected to the HomeBase.

  • Page 81: Back Panel

    ActiveSync (see Communication on page 6-3). Hand Held Products recommends that you leave the HomeBase connected to its power source at all times, so that it is always ready to use. Dolphin® 7600 User’s Guide Powering the Dolphin HomeBase...

  • Page 82: Charging The Main Battery

    Charging the Main Battery The HomeBase powers the terminal and fully charges its main battery pack in less than four hours. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage.

  • Page 83: Mounting The Dolphin Homebase

    Mounting the Dolphin HomeBase If you want to mount the HomeBase to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is seated in the HomeBase. Back Panel Dimensions .32 in.

  • Page 84: Bottom Panel Dimensions

    Bottom Panel Dimensions Note: The pivot connector should be facing straight out the bottom panel (as shown) when mounting the HomeBase to a vertical surface. 8 - 6 .55 in. (14.07 mm.) Rev D 10/18/2007 .67 in. (16.97 mm.) 3.73 in. (94.88 mm.) Dolphin®...

  • Page 85: Dolphin Homebase Technical Specifications

    Dolphin HomeBase Technical Specifications Structural Dimensions 4 in. high X 4.4 in. wide X 3.7 in. deep (10.2 cm. X 11.2 cm. X 9.4 cm.) Weight 11.2 oz. (318g) Material Polycarbonate ABS blend Color Gray Mounting Two keyholes on the back panel for wall-mounting Capacity One Dolphin terminal Environmental...

  • Page 86

    8 - 8 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 87: Chapter 9 - Dolphin Quadcharger

    Hand Held Products will void the warranty and may damage the terminal. Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by Hand Held Products in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or bat...

  • Page 88: Back Panel

    Back Panel Power Supply Connector Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input voltages between 90-265 volts. Power Switch Toggle the power switch to turn the QuadCharger on and off. Supplying Power to the QuadCharger Use the power adapter cable that comes with the Dolphin QuadCharger so that the input voltage is adjusted appropriately.

  • Page 89: Battery Charging

    To remove a battery pack, push the locking tab down and pull the battery away from the charging slot with a hinging motion. Charging Process The QuadCharger charges Dolphin 7600 Li-ion battery packs in four hours. Each charging slot works independently of the other three. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries.

  • Page 90: Mounting The Quadcharger

    Mounting the QuadCharger The QuadCharger should be mounted on a dry, stable surface such as a desktop or workbench, or a flat, vertical surface such as a wall. Mounting Location When choosing a location for the QuadCharger: • Keep in mind that the mounting location must allow users easy access to power switch and power connector. •...

  • Page 91: Troubleshooting

    If the red status stays with the charging slot, the problem is associated with the charging circuitry. An error occurred during the self-diagnostic test for that particular charging pocket. Call Hand Held Products (see page 11-1) to request an RMA. Rev D...

  • Page 92: Dolphin Quadcharger Technical Specifications

    Dolphin QuadCharger Technical Specifications Structural Dimensions 11 in. long X 4.8 in. wide X 1.5 in. high (27.9 cm. X 12.2 cm. X 3.8 cm.) Weight 15.1 oz. (428g) Material Case: Polycarbonate ABS blend Color: Gray Mounting Use DIN rail slide to mount to a desktop or wall; see Capacity Supports up to four Li-ion battery packs Environmental...

  • Page 93: Chapter 10 - Dolphin Mobile Mount

    10-3. 1. Insert the back panel of a Dolphin 7600 terminal and gently place the lip of the top of the latch in place at the bottom of the image engine window. Do NOT pull back on the latch and snap in place! Make sure that the Dolphin terminal is securely fastened inside the mount but do not use excessive force.

  • Page 94

    2. The latch at the top should grip the back of the image engine window slot. Image Engine Latch Window 10 - 2 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 95: Mounting

    Mounting The Dolphin Mobile Mount ships with a standard RAM mount (101B). You attach one ball joint that you attach to the back panel of the mount (with the fasteners provided). Dolphin® 7600 User’s Guide Rev D 10 - 3 10/18/2007...

  • Page 96

    Then, you attach the rest of the RAM mount. Then, affix the RAM mount to a stable surface. 10 - 4 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 97: Product Service And Repair

    Product Service and Repair Hand Held Products provides service for all its products through service centers throughout the world. To obtain warranty or non- warranty service, return the unit to Hand Held Products (postage paid) with a copy of the dated purchase record attached.

  • Page 98: Technical Assistance

    Technical Assistance If you need assistance installing or troubleshooting, please call your Distributor or the nearest Hand Held Products technical support office: North America/Canada Telephone: (800) 782-4263 Fax number: (315) 554-6705 E-mail: natechsupport@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 E-mail: latechsupport@handheld.com...

  • Page 99: Limited Warranty

    (E) repair or service of the product by anyone other than Hand Held Products or its authorized representatives. This warranty shall extend from the time of shipment for the duration published by Hand Held Products for the product at the time of purchase ("Warranty Period").

  • Page 100

    11 - 4 Rev D Dolphin® 7600 User’s Guide 10/18/2007...

  • Page 102

    Hand Held Products, Inc. 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 ™ 76-CE-UG Rev D 10/18/2007...

Comments to this Manuals

Symbols: 0
Latest comments: