Download Print this page

Hand Held Products Dolphin 9500 Option Installation Manual

Screen protector installation.
Hide thumbs
   

Advertisement

Installing Your Screen Protector
Dolphin
®
9500 Mobile Computer
1. Clean the touch panel thoroughly with a clean, non-
abrasive, lint-free cloth.
Make sure nothing else is still attached to the touch panel.
2. Uncover about an inch of the touch panel protector by
peeling one edge slightly from its backing.
3. Align the exposed section of the protector with the bottom
edge of the touch panel.
Make sure that it lies flush with each side of the touch
panel. To reposition, lift up gently and reapply.
4. Apply the touch panel protector to your device by sliding
the enclosed squeegee across the surface as you peel
away the backing.
Use the squeegee as necessary to smooth out any air
pockets or bumps.
Screen Protector Instructions
95-ScrnSht Rev A

Advertisement

   Related Manuals for Hand Held Products Dolphin 9500

   Summary of Contents for Hand Held Products Dolphin 9500

  • Page 1

    Installing Your Screen Protector Dolphin ® 9500 Mobile Computer 1. Clean the touch panel thoroughly with a clean, non- abrasive, lint-free cloth. Make sure nothing else is still attached to the touch panel. 2. Uncover about an inch of the touch panel protector by peeling one edge slightly from its backing.

  • Page 2

    Usage Guidelines Hand Held Products defines proper use of the terminal touch panel as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel, such as signature capture for proof of delivery.

Comments to this Manuals

Symbols: 0
Latest comments: