The Status Icon - Hand Held Products Dolphin 9500 User Manual

Dolphin 9500 series
Hide thumbs Also See for Dolphin 9500:
Table of Contents

Advertisement

The Status Icon

You access the 801.11b Settings by tapping and holding on the Status icon
screen. The following menu pops up:
Menu Option
Wireless Radio On
Wireless Radio Off
Remove Status Icon
Wireless Network Status
Configuration
Advanced Configuration
Version Information
Note: The Status Icon changes to a crossed lock
for the WEP-On AP or a station.
7 - 12
Selecting This Option...
Turns on the radio. LED is on and the Link Icon displays with signal strength.
Turns off the radio. A pop-up window will ask for your confirmation. If confirmed, the LED
will be off and the Status icon will change color from green to red on the top without signal
strength displayed. The WLAN card/module will stop functioning.
Removes the Status Icon from the bottom
tray. A pop-up window asks you to confirm.
Click Yes to confirm, or No to cancel.
If confirmed, the Status icon does not display
in the task tray, and you will need to go to
Start > Programs > 802.11b Settings in the
future.
Opens the Status tab of the configuration utility; see
Opens the Config tab of the configuration utility; see
Opens the Advanced tab of the configuration utility; see
Opens the About tab of the configuration utility; see
as a warning that you may have entered a wrong key (WEP Key mismatch)
in the task tray at the bottom of the Today
Status Tab on page 7-3.
Config Tab on page 7-5.
Advanced Tab on page 7-10.
About Tab on page 7-11.
Dolphin® 9500 Series Mobile Computer User's Guide

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dolphin 9550Dolphin 9501Dolphin 9551

Table of Contents