Front Panel Features - Hand Held Products Dolphin 7600 Series User Manual

Front Panel Features

1/4 VGA Touch
Screen Display
Decode and Scan LEDs
The Scan LED lights red when you press the Scan trigger in scanning applications.
The Decode LED lights green when a scanned bar code is successfully decoded.
Note: Both LEDs are user-programmable.
Hardware Application Buttons
These hardware buttons can be programmed to perform software functions in the Buttons setting. For more
information, see
Keyboard
The 29-key keyboard is recessed within the housing to increase durability. For complete information about the
keyboard (including the Scan key called out here), see
Microphone
The integrated microphone can be used for voice-recording and reply.
Touch Screen Display
The display is a 65,536-color LCD (Liquid Crystal Display) covered by a touch screen lens. The 2.8" (1/4) VGA
(Video Graphic Array) is TFT (Thin Film Transistor) color, backlit, and the resolution is 240 x 320.
Dolphin 7600 devices ship with a screen protector already installed over the touch screen lens to help prevent
!
damage to the touch screen. Do NOT remove this screen protector before initial use. Hand Held Products
recommends using screen protectors, especially for applications that require high-volume interfacing with the
touch screen.
For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends
on which one is most appropriate for your application. While there is a great deal of variation in different applications,
for buttons or icons that are close together, you generally achieve greater accuracy with the stylus; see
Stylus on page
! Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and
will void the warranty.
3 - 2
Decode LED
Hardware
Application
Buttons
Keyboard
Hardware Application Buttons
2-3.
Rev B
1/17/2007
Scan LED
Scan key
Microphone
on page 4-2.
Using the 29-Key Keyboard on page 4-1.
Dolphin® 7600 Series User's Guide
Using the