Hand Held Products Dolphin 9500 User Manual page 31

Step 9. Verifying Operations with HHP Demos
The Dolphin 9500 Series mobile computer comes loaded with HHP Demos you can use to verify imaging and decoding.
Verify Imaging
The Image Demo enables you to use the imager to capture an image.
Start Demos
1. Go to >
2. Point the terminal at an object and press the SCAN key. A preview of the object appears on the terminal screen.
3. Release the SCAN key. The image is captured. By default, the image saves to the My Device folder as "imagedemo.jpg." To
save to a different location, go to
4. Press the ESC key to close the demo.
For more information about taking an image, see
Verify Decoding
The Scan Demo enables you to decode a sample bar code.
Start Demos
1. Go to >
2. Aim the terminal at a bar code and press the SCAN key. The scan LED lights red, and a green aimer beam projects out from
the scanner.
3. When a good scan is obtained, the decode LED lights solid green and the terminal beeps. The bar code readout appears on
the screen.
4. Press the ESC key to close the demo.
Sample Bar Codes
You can use the following bar codes to verify decoding:
Sample 128
Code 128
Note: The Dolphin 9551 supports only 1D symbologies; use Code 128 to verify scanning.
For more information, see
Dolphin® 9500 Series Mobile Computer User's Guide
Image Demo
> . The image demo opens.
File Save As
>
Using the Imager
Scan Demo
> .
Decoding on page 4-6.
and select a new location.
on page 4-6.
Sample PDF417
PDF417 Test Message
2 - 11