Hand Held Products Dolphin 9500 User Manual page 261

Terminal Well
Place the Dolphin terminal in this well to communicate with a host device, power the terminal, and charge its battery
pack. If the host device is a desktop computer that uses ActiveSync, synchronization begins immediately. While seated
in the terminal well, the main battery installed in the terminal charges. The HomeBase completely charges a battery
pack in less than four hours.
Auxiliary Battery Well
See Auxiliary Battery Well
DOCK LED
Turns solid green when the Dolphin terminal is properly seated in the Dolphin HomeBase. When this light is on, the
terminal is connected to the base.
AUX Battery LED
Indicates status of the battery charging in the auxiliary battery well.
This color
Orange
Green
To see the auxiliary battery well, see
For information about charging a battery in the auxiliary battery well, see page
COMM LED
This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host device.
The color of this LED differs if the HomeBase is using the serial or USB port connection.
If using the serial port
This color
Red
Green
Orange
If using the USB port
This color
Green LED
Dolphin® 9500 Series Mobile Computer User's Guide
on page 12-4.
means...
The auxiliary battery is charging.
The auxiliary battery has completed charging and is ready for use.
Rear Panel on page
means...
Serial data is being sent from the Host Device to the Dolphin HomeBase.
Serial data is being sent from the Dolphin HomeBase to the Host Device.
Serial data is being sent at high data rates.
means...
A USB Connection is established with the host computer.
12-4.
12-7.
12 - 3