Power Supply; Supplying Power To The Chargebase - Hand Held Products Dolphin 9500 User Manual

Power Supply

The ChargeBase includes a power supply that contains a power adapter to ensure the proper voltage. The power adapter is
plugged into standard AC/DC outlets.

Supplying Power to the ChargeBase

Using a non-HHP power adapter voids your warranty and could result in serious damage to the circuitry of the Dolphin
!
ChargeBase.
1. Be sure the power switch on the power adapter is in the OFF position.
2. Plug the power cord into the power adapter.
3. Plug the power connector cable into the power connector on the back panel of the ChargeBase.
4. Plug the power cord into a standard wall outlet.
5. On the power adapter, turn the power switch to the ON position. The LEDs illuminate as the ChargeBase powers up.
6. The ChargeBase is ready to begin charging terminals.
Dolphin® 9500 Series Mobile Computer User's Guide
Power Adapter
Power Cord
ON/OFF
Switch
ON Position
Power
Connector
Cable
14 - 3