Enable Storage Array Feature - Dell PowerVault Manual

Parameter
Parameter
controller

Enable Storage Array Feature

Description
This command enables a premium feature using a feature key file.
Syntax
enable storageArray [featurePack | feature]
file="filename"
Parameter
Parameter
file
Additional Information
A feature pack is a predefined set of premium features, such as Storage Partitioning and Remote
Replication. These premium features are combined for the convenience of the users.
A premium feature is an additional application to enhance the capabilities of a storage array.
NOTE: Before you enable the High Performance Tier premium feature, stop all host I/O operations
to the storage array. When you enable the High Performance Tier premium feature, both RAID
controller modules in the storage array immediately reboot.
Description
RAID controller module that you want to revive.
Valid RAID controller module identifier values are 0
and 1. The identifier value is 0 for the RAID
controller module on the top and 1 for the RAID
controller module on the bottom when viewed
from the rear of the enclosure. You must put
brackets ([ ]) around the RAID controller module
identifier. If you do not specify a RAID controller
module, the storage management software returns
a syntax error.
Description
File path and file name of a valid feature key file.
Valid file names for feature key files must end with
a .key extension. You must put quotation marks ("
") around the file path and file name.
223